(1) Rockville RMM-XLR Dynamic Cardiod Professional Metal Microphone W/10' XLR Cable. (1) Rockville IPS20 Tablet/SmartPhone/iPhone/iPad Tripod Stand 4 All Tablets/Phones. (1) Pair of Rockville RVSM1 Near-Field Studio Monitor Stands w/ Adjustable Height.The Rockville HTS8B is a complete all in one home theater system! This has everything built in! Each speaker has a powerful 8 woofer for incredible bass and a 1 neodymium silk dome tweeter for incredible highs. These speakers have Bluetooth, USB, SD, FM radio, and all of the inputs and outputs you will ever need.
We also added a ¼ mic input so this system can be used for karaoke. With the HTS series by Rockville you get. True studio sound in your home! These are the best sounding home theater speakers on the market! An entire home theater system all built into (2) speakers!
No additional amps, radios, receivers, etc! Beautiful design that will enhance the look of any room in your house. We know you will love these.
Best sound on the market guaranteed! Rockvilles APM series has been one of the top reviewed and bestselling studio speakers on the market.What we did was we took the exact same studio speakers and added Bluetooth, USB, SD, FM radio, and changed all the inputs and outputs on them to create the ultimate home theater system! We also added a fully functional remote control. When we say that these speakers give you studio quality sound, it is more than true! These are literally the same speakers we sell for studios. What this means is that there is a separate amp for the highs and a separate amp for the lows! Each speaker has 500 watts peak output power and 125 watts RMS giving you a total of 1000 watts peak and 250 watts RMS per pair. We spent a lot of time developing the most premium speakers we ever built!
If you are an audiophile you will find what we did to be quite amazing. We are one of the leading speaker manufacturers in the USA, and we have a state of the art manufacturing process.
There is a lot to talk about so I will break it down into sections. Description of the enclosure: We chose a wooden enclosure as opposed to a plastic enclosure. Professional studios are made of wood for a reason. The sound characteristics of high quality wood are better than plastic. We only use the highest quality MDF wood.We do not bother with cheap particle board material when we want to make the best speakers. The thickness is 0.5 around and the front board is a full 1 thick to give you the best sound quality possible. The enclosure is built with the perfect amount of air space to maximize sound quality.
We believe speakers should enhance the look of a room. We make these speakers in 3 beautiful finishes. Painted black, painted white, and wood finish. We use baking paint made for wood surfaces.It is long lasting and the best paint for speakers! We went with a beautiful finish that is mostly matte with a slight shine to it. Our designers spent countless hours on the color to make sure it is not only beautiful but elegant as well to improve the appearance of your room. We kept all the controls on the back of the speaker, which will keep the speaker looking very modern and elegant. The rear port is built to perfect spec to enhance the sound. The tweeter has a curved front bezel to make the highs crystal clear and distortion free. Amplifier and Speaker Components Details: To get the most efficiency we use a class D amplifier. We use the best quality components from the most reputable circuit manufacturers in the world in order to produce crystal clear sound. Most brands do not like to reveal whats in the guts of the speaker. We want you to know what is inside so you realize how good of a value we are offering and also so that you can understand how good these really are. We use ADAU 1701 for audio processing and TPA3116 for amplification. These are both known to be best in class circuit designs. These components are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound. ADI and TI are the names of the makers of these ICs. Most people do not know brand names that make circuits; but these are the most famous and reliable in the industry. Only very high end manufacturers like us use these components. " For highs, we use Ferro fluid enhanced 1" neodymium silk dome tweeters with metal grill protection. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without worrying about melting and blowing the tweeter.
I cannot wait for you all to hear it in person, because I cannot describe how good these sound! You really need to listen to them in person. We use an 8 woofer. This will out-perform a 5 woofer any day!
The woofer has an injection molded polypropylene cone. This is an engineered type of plastic that is used on many speakers today.It is strong and puts out great sound. The rubber woofer surrounds increase sound quality and eliminate unwanted distortion. They sound better than foam surrounds in my opinion, which is why we went with rubber. The computer optimized electronic crossover network supplies amazing sounding highs, lows, and mids.
Basically it filters out unwanted frequencies from each component so that each speaker plays the right frequencies so that the speaker can go loud without distorting. We use very high-grade crossover filters in our speakers. The specially wounded voice coils produce accurate response along the entire frequency spectrum. We developed the speakers with the most optimized magnet structure, cone, and cabinet space with the goal of reproducing the sound to play back exactly the way it was recorded! Added benefits: The rear-firing port is shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). Well, actually, the glue on speakers is of the utmost importance.
If the glue does not hold up, the speaker will malfunction and blow. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine that can secure the glue in place.
If the glue can handle more heat than your speaker can handle more power! Thick Wadding protects the inside of the speaker cabinet. This can be seen if the speaker cabinet is removed.
Basically, wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps make the sound more clear, and at the same time protects all the parts inside the speaker.This material is also a fire retardant. This is unique to our speakers. Most other brands do not take this step due to the cost of the material, but it is a game changer if you are trying to create the best speaker! Inputs and Outputs and Rear Panel Controls: As I mentioned earlier, we kept all the controls on the rear of the unit to make the speaker look clean and modern. The volume control, bass, and treble controls are all found on the rear of the unit. These Monitors have all your standard studio inputs and outputs such as a ¼ input jack, RCA input, and a 3.5MM headphone output. We also added USB and SD input ports for even more input capabilities. There is a set of RCA outputs as well as an output port to the left speaker. It uses our proprietary noise rejecting cable. It features a special cable tip that will not allow the user to plug the cable in backwards. The cable locks in secure and tight. Rockville HTS8B black dual 8 complete home theater system. 1000 Watt powered bi-amped speakers (Pair). Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers. Built In Bluetooth with 150 foot range and perfect interference-free sound quality. Built in SD card playback.
Built in FM radio with crystal clear reception. Digital display on front panel with brightness control. Enclosure is made of top quality MDF wood.
Our enclosure is not particle board, it is true high-grade MDF! The enclosure is 0.5 thick while the front board of it is a full 1 thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish with vinyl front board. We use baking paint made for wood surface.It lasts long and is the best paint for speakers! Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room.
The enclosure is built with the perfect amount of air space to maximize sound quality for a studio. The port is built to the perfect spec to enhance the sound. Full Range Class D Amplifier Circuitry with Auto-Switching Power Supply. LED Power on Indicator on Rear Panel.Ferro Fluid Enhanced 1 Neodymium Silk Dome Tweeter With Metal Grill Protection. Tweeter has 1 voice coil diameter. Curved Front Bezel Design Eliminates Standing Wave Distortion. Injection Molded Polypropylene Cone Woofer. Rubber woofer surrounds increases sound quality and eliminates unwanted distortions. Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids. Rear-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality! We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded!
Specially Wound Voice Coils Produce Accurate Response along Entire Frequency Spectrum. Distortion-Free Playback Even at Max Volume Listening! To put it in simple to understand terms; the glue on speakers is of the upmost importance. If the glue does not hold up, the speaker is done.The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place. Thick Wadding protects inside the speaker cabinet Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. Most other brands do not take this step due to the cost of the material, but it is a game changer!
World class top of the line audiophile grade components! These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound.Most people do not know brands who make circuits, but these are famous in that industry and known to be the best of the best. Only very high end products use these components.
110 Volt compatible with SMPS technology Normally most items have a transformer. Our SMPS technology switches voltages more efficiently and adheres to all international efficiency standards! Every Speaker in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards. We use a 6Sigma style Quality Assurance of Each Product Long story short, each product will work perfectly as advertised for a long long time!
Transducer Production Line to Make the SPL Performance Stable One Complete Pair with Mater / Salve Output Connection with Included Noise Rejection Cabling. Includes a noise rejection cable to connect the 2 speakers together (This is a proprietary cable we use that connects the 2 speakers together without any unwanted noise).We also use a special cable tip that will not allow the user to plug the cable in backwards. Comes in 3 beautiful finishes: Painted Black, Painted White, Vinyl Wood Finish Inputs / Outputs / Controls. Bass/Treble Control -4dB to 4dB (allows you to adjust high and low frequency independently). (1) 3.5MM aux input. Rear panel USB and SD inputs.
¼ Mic input for karaoke (with echo control and mic volume control). Inputs / Outputs / Controls. Front panel UB and SD inputs. (1) ¼ Mic input for karaoke.
(1) pair of RCA outputs make the system expandable. Certification: CE and RoHS Compliant. Amplifier: Class D, very efficient amplifier with top components! System Impedance: Tweeter 6 Ohms ; Woofer 4 Ohms.
Signal to noise ratio: 91dB (Maximum output with THD+1<1%, A-weight). Frequency Response: 30Hz - 20 kHz.
1000 Watts peak output per pair. 250 Watt RMS output per pair. Each speaker produces 125 watts RMS and 500 watts Peak. Components: 1" neodymium silk dome tweeter and 8" woofer with rubber surrounds and polypropylene cone.
Product Dimensions in Inches (Single): (WHD): 9.9'' x 15.4'' x 12.2'. Net Weight(Pair): 33 LBS. Includes speaker linking cable and power plug. Input Impedance (Ohms): 10 K Ohm Balanced.
System Volume: (-30dB to +6dB). RMM-XLR 100% Metal wired mic. 10 foot XLR Mic Cable. The Rockville RMM-XLR is designed with the professional performer in mind. The RMM-XLR has excellent vocal reproduction and will sound great whether you are in the studio or on stage.The RMM-XLR is constructed with solid metal to ensure reliability. The RMM-XLR has a very nice weight which feels sturdy in the performer's hand giving them the confidence they need to perform their best! The RMM-XLR features XLR output which ensures the best sound quality possible also included is a high quality rugged 10 FT XLR cable. Professional 10 FT XLR Cable Included. Beautiful Black Finish (The perfect combination of matte and shiny black finish).
± 3dB (0dB=1V/Pa at 1KHz). Adjustable height from 35.5" to 63". Stand for iPad, iPhone and other tablets and phones from 4.7" to 12.9" screen sizes. Fits any tablet with the width up to 9 inches - If the width of your tablet is 9 inches or under it fits in this stand.Comfortably use whether standing, sitting. Perfect for karaoke, speeches, presentations, and more. Tilts +5 degree and -5 degree for different angle viewing. Foldable design for easy transportation and storage. Holder material : ABS and rubber surface.
Stand material : Steel tubes with powder coating. 3 Panel Mic Isolation Shield. Hardware to Mount unit to your mic stand. Rockvilles RMF1 compact studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories.Featuring 1.5-inch-thick high density acoustic foam, the RMF1 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop.
Easy installation and studio quality performance will quickly make the RMF1 your go-to sound dampening isolation shield. RMF1 Pro Audio Acoustic Microphone Isolation Shield with Sound Dampening Foam. Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks. Isolates Directional Microphones from Off Axis Coloration. Limits External Bleed from Unintended Sound Sources.Features 1.5-Inch-Thick High Density Pyramid Acoustic Foam. Front and a vented metal back plate for the Best Noise Reflection Reduction. Can be used in fixed location. Provides Vocal Booth Style Recordings with Minimal Footprint. Rugged Finish Makes This Easy to Transport. Tri-Pod Foot Design for Stability on Flat Surfaces. Mic Stand with 5/8 Adapter. The shield is made of pure high-grade steel. Number of Panels : 3 pcs.
Dimensions Each Panel : 8.2'' x 4.5'. Dimensions Assembled Unit : 11'' x 4.3 x 16.3. These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind.
The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel. EVA Pad on top to eliminate unwanted vibrations.
Triple enforced steel base with ultimate sturdiness. Adjustable height Range: 33-45 inches.Base: 17.7 x 17.7 x 17.7 inches. Top Plate: 9.05 x 9.45 inches. Tube Diameter: 1.5 inch- 1.37 inch. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options.
We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. This includes blown speakers with burned voice coils. The item "Rockville 8 1000 Watt Powered Home Theater/Karaoke System Machine with Bluetooth" is in sale since Wednesday, May 15, 2019.
This item is in the category "Musical Instruments & Gear\Karaoke Entertainment\Complete Karaoke Systems". The seller is "audiosavings" and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Saint lucia, Montserrat, Turks and caicos islands, Bolivia, Jordan, Sri lanka, Luxembourg, Maldives, Peru, Paraguay, Viet nam, Uruguay.